Online Encyclopedia

QUATERNIONS

Online Encyclopedia
Originally appearing in Volume V22, Page 723 of the 1911 Encyclopedia Britannica.
Spread the word: del.icio.us del.icio.us it!
QUATERNIONS, in mathematics. The word "quaternion " properly means " a set of four." In employing such a word to denote a new mathematical method, Sir W. R. Hamilton was probably influenced by the recollection of its Greek equivalent, the Pythagorean Tetractys (TeTpaKTUS, the number four), the mystic source of all things. Quaternions (as a mathematical method) is an extension, or improvement, of Cartesian geometry, in which the artifices of co-ordinate axes, &c., are got rid of, all directions in space being treated on precisely the same terms. It is therefore, except in some of its degraded forms, possessed of the perfect isotropy of Euclidian space. From the purely geometrical point of view, a quaternion may be regarded as the quotient of two directed lines in space—or, what comes to the same thing, as the factor, or operator, which changes one directed line into another. Its analytical definition will appear later. History.—The evolution of quaternions belongs in part to each of two weighty branches of mathematical history—the interpretation of the imaginary (or impossible) quantity of common algebra, and the Cartesian application of algebra to geometry. Sir W. R. Hamilton was led to his great invention by keeping geometrical applications constantly before him while he endeavoured to give a real significance to 1/-r. We will tree of Surinam in honour of the negro Quassi or Coissi, who employed the intensely bitter bark of the tree (Quassia amara) as a remedy for fever. The original quassia was officially recognized in the London Pharmacopoeia of 1788. In 1809 it was replaced by the bitter wood or bitter ash of Jamaica, Picraena excelsa, which was found to possess similar properties and could be obtained in pieces of much larger size. Since that date this wood has continued in use in Britain under the name of quassia to the exclusion of the Surinam quassia, which, however, is still employed in France and Germany. Picraena excelsa is a tree 5o to 6o ft. in height, and resembles the common ash in appearance. It has large compound leaves composed of four therefore confine ourselves, so far as his predecessors are concerned, to attempts at interpretation which had geometrical applications in view. One geometrical interpretation of the negative sign of algebra was early seen to be mere reversal of direction along a line. Thus, when an image is formed by a plane mirror, the distance of any point in it from the mirror is simply the negative of that of the corresponding point of the object. Or if motion in one direction along a line be treated as positive, motion in the opposite direction along the same line is negative. In the case of time, measured from the Christian era, this distinction is at once given,by the letters A.D. or B.C., prefixed to the date. And to find the position, in time, of one event relatively to another, we have only to subtract the date of the second (taking account of its sign) from that of the first. Thus' to find the interval between the battles of Marathon (490 B.C.) and Waterloo (A.D. 1815) we have +1815—(—490) =2305 years. And it is obvious that the same process applies in all cases in which we deal with quantities which may be regarded as of one directed dimension only, such as distances along a line, rotations about an axis, &c. But it is essential to notice that this is by no means necessarily true of operators. To turn a line through a certain angle in a given plane, a certain operator is required; but when we wish to turn it through an equal negative angle we must not, in general, employ the negative of the former operator. For the negative of the operator which turns a line through a given angle in a given plane will in all cases produce the negative of the original result, which is not the result of the reverse operator, unless the angle involved be an odd multiple of a right angle. This is, of course, on the usual assumption that the sign of a product is changed when that of any one of its factors is changed,—which merely means that—i is commutative with all other quantities. John Wallis seems to have been the first to push this idea further. In his Treatise of Algebra (1685) he distinctly proposes to construct the imaginary roots of a quadratic equation by going out of the line on which the roots, if real, would have been constructed. In 18o4 the Abbe Buee (Phil. Trans., 18o6), apparently without any knowledge of Wallis's work, developed this idea so far as to make it useful in geometrical applications. He gave, in fact, the theory of what in Hamilton's system is called Composition of Vectors in one plane i.e. the combination, by + and —, of complanar directed lines. His constructions are based on the idea that the imaginaries = — i represent a unit line, and its reverse, perpendicular to the line on which the real units t 1 are measured. In this sense the imaginary expression a + b -J — r is constructed by measuring a length a along the fundamental line (for real quantities), and from its extremity a line of length b in some direction perpendicular to the fundamental line. But he did not attack the question of the representation of products or quotients of directed lines. The step he took is really nothing more than the kinematical principle of the composition of linear velocities, but expressed in terms of the algebraic imaginary. In 1806 (the year of publication of Buee's paper) Jean Robert Argand published a pamphlet2 in which precisely the same ideas are developed, but to a considerably greater extent. For an interpretation is assigned to the product of two directed lines in one plane, when each is expressed as the sum of a real and an imaginary part. This product is interpreted as another directed line, forming the fourth term of a proportion, of which the first i Strictly speaking, this illustration of Tait's is in error by unity because in our calendar there is no year denominated zero. Thus the interval between June the first of i B.C. and June the first of I A.D. is one year, and not two years as the text implies. (A.McA.) 2 Essai sur une maniere de representer les Quantites Imaginaires dans les Constructions Geometriwues. A second edition was published by J. Houel (Paris, 1874). There is added an important Appendix. consisting of the papers from Gergonne's Annales which are referred to in the text above. Almost nothing can, it seems, be learned of Argand's private life, except that in all probability he was born at Geneva in 1768.term is the real (positive) unit-line, and the other two are the factor-lines. Argand's work remained unnoticed until the question was again raised in Gergonne's Annales, 1813, by J. F. Francais. This writer stated that he had found the germ of his remarks among the papers of his deceased brother, and that they had come from Legendre, who had himself received them from some one unnamed. This led to a letter from Argand, in which he stated his communications with Legendre, and gave a resume of the contents of his pamphlet. In a further communication to the Annales, Argand pushed on the applications of his theory. He has given by means of it a simple proof of the existence of n roots, and no more, in every rational algebraic equation of the nth order with real coefficients. About 1828 John Warren (1796—1852) in England, and C. V. Mourey in France, independently of one another and of Argand, reinvented these modes of interpretation; and still later, in the writings of Cauchy, Gauss and others, the properties of the expression a + b Al — i were developed into the immense and most important subject now called the theory of complex numbers (see NUMBER). From the more purely symbolical view it was developed by Peacock, De Morgan, &c., as double algebra. Argand's method may be put, for reference, in the following form. The directed line whose length is a, and which makes an angle 0 with the real(positive) unit line, is expressed by a (cos 0+i sin 0), where i is regarded as + -1. The sum of two such lines (formed by adding together the real and the imaginary parts of two such expressions) can, of course, be expressed as a third directed line)—the diagonal of the parallelogram of which they are conterminous sides. The product, P, of two such lines is, as we have seen, given by 1:a(cos 0-{-isin0) : : a'(cos0'-{-isin0'):P, or P=aa' (cos (0+0')+isin (0+ 0') Its length is, therefore, the product of the lengths of the factors, and its inclination to the real unit is the sum of those of the factors. If we write the expressions for the two lines in the form A+Bi, A'+B'i, the product is AA'—BB'-l-i(AB'+BA'); and the fact that the length of the product line is the product of those of the factors is seen in the form (A2 +132) (A'2+B'2) _ (AA' — BB')2+ (AB' + BA')2. In the modern theory of complex numbers this is expressed by saying that the Norm of a product is equal to the product of the norms of the factors. Argand's attempts to extend his method to space generally were fruitless. The reasons will be obvious later; but we mention them just now because they called forth from F. J. Servois (Gergonne's Annales, 1813) a very remarkable comment, in which was contained the only yet discovered trace of an anticipation of the method of Hamilton. Argand had been led to deny that such an expression as ii could be expressed in the form A+Bi,—although, as is well known, Euler showed that one of its values is a real quantity, the exponential function of—sr/2. Servois says, with reference to the general representation of a directed line in space: " L'analogie semblerait exiger que le trinome fut de la forme p cos a+q cos 13+r cos a, 13, y etant les angles d'une droite avec trois axes rectangulaires; et qu'on eut (p cos a + q cos l3 + r cos 7) (p' cos a + q' cos I + r' cos y) =cos2a+cos213+cos2y=1. Les valeurs de p, q, r, p', q,' r', qui satisferaient a cette condition seraient absurdes; mais seraient-elles imaginaires, reductibles a la forme gEnerale A+B v -1 ? Voila une question d'analyse fort singulibre que je soumets a vos lumieres. La simple proposition que je vous en fais suffit pour vous faire voir que je ne crois point que toute fonction analytique non reelle soit vraiment reductible a la forme A+B s/ -1." As will be seen later, the fundamental i, j, k of quarternions, with their reciprocals, furnish a set of six quantities which satisfy the conditions imposed by Servois. And it is quite certain that they cannot be represented by ordinary imaginaries. Something far more closely analogous to quaternions than anything in Argand's work ought to have been suggested by De 1Vloivre's theorem (1730). Instead of regarding, as Buee and Argand had done, the expression a(cos 0 + i sin 0) as a directed line, let us suppose it to represent the operator which, when applied to any line in the plane in which 0 is measured, turns it in that plane through the angle 0, and at the same time increases its length in the ratio a : 1. From the new point of view we see at once, as it were, why it is true that (cos 0+ i sin 0)Y. = cos m0+ i sin m0. For this equation merely states that in turnings of a line through successive equal angles, in one plane, give the same result as a single turning through m times the common angle. To make this process applicable to any plane in space, it is clear that we must have a special value of i for each such plane. In other words, a unit line, drawn in any direction whatever, must have -1 for its square. In such a system there will be no line in space specially distinguished as the real unit line: all will be alike imaginary, or rather alike real. We may state, in passing, that every quaternion can be represented as a (cos 0+ a sin 0),—where a is a real number, 0 a real angle, and 1r a directed unit line whose square is -1. Hamilton took this grand step, but, as we have already said, without any help from the previous work of De Moivre. The course of his investigations is minutely described in the preface to his first great work (Lectures on Quaternions, 1853) on the subject. Hamilton, like most of the many inquirers who endeavoured to give a real interpretation to the imaginary of common algebra, found that at least two kinds, orders or ranks of quantities were necessary for the purpose. But, instead of dealing with points on a line, and then wandering out at right angles to it, as Buee and Argand had done, he chose to look on algebra as the science of " pure time," l and to investigate the properties of " sets " of time-steps. In its essential nature a set is a linear function of any number of " distinct " units of the same species. Hence the simplest form of a set is a " couple "; and it was to the possible laws of combination of couples that Hamilton first directed his attention. It is obvious that the way in which the two separate time-steps are involved in the couple will determine these laws of combination. But Hamilton's special object required that these laws should be such as to lead to certain assumed results; and he therefore commenced by assuming these, and from the assumption determined how the separate time-steps must be involved in the couple. It we use Roman letters for mere numbers, capitals for instants of time, Greek letters for time-steps, and a parenthesis to denote a couple, the laws assumed by Hamilton as the basis of a system were as follows: (B1, B2) — (Ai, A2) = (B, —A,, B2—A,) = (a, ) ; (a, b) (a, 19) = (aa—b,6, ba+a/3) 2 To show how we give, by such assumptions, a real interpretation to the ordinary algebraic imaginary, take the simple case a=o, b= I, and the second of the above formulae gives (0, 1)(a, $)=(- Q, a). Multiply once more by the number-couple (o, I), and we have (0,1)(0, 1)(a,0)=(0, 1)(— ,a)=(—a,—R)=(—I,0)(a,0)=—(a,0). Thus the number-couple (o, I), when twice applied to a step-couple, simply changes its sign. That we have here a perfectly real and intelligible interpretation of the ordinary algebraic imaginary is easily seen by an illustration, even if it be a somewhat extravagant one. Some Eastern potentate, possessed of absolute power, covets the vast possessions of his vizier and of his barber. He determines to rob them both (an operation which may be very satisfactorily expressed by —I); but, being a wag, he chooses his own way of doing it. He degrades his vizier to the office of barber, taking all his goods in the process; and makes the barber his vizier. Next day he repeats the operation. Each of the victims has been restored to his former rank, but the operator —I has been applied to both. Hamilton, still keeping prominently before him as his great object the invention of a method applicable to space of three dimensions, proceeded to study the properties of triplets of the form x+iy+jz, by which he proposed to represent the directed line in space whose projections on the co-ordinate axes are x, y, z. The composition of two such lines by the algebraic I Theory of Conjugate Functions, or Algebraic Couples, with a Preliminary and Elementary Essay on Algebra as the Science of Pure Time, read in 1833 and 1835, and published in Trans. R. I. A. xvii. ii. (1835). 3 Compare these with the long-subsequent ideas of Grassmann.addition of their several projections agreed with the assumption of Buee and Argand for the case of coplanar lines. But, assuming the distributive principle, the product of two lines appeared to give the expression xx' —yy' —zz'+i (yx'+xy') +j (xz'+zx') +ij (yz' +zy') For the square of j, like that of i, was assumed to be negative unity. But the interpretation of ij presented a difficulty—in fact the main difficulty of the whole investigation—and it is specially interesting to see how Hamilton attacked it. He saw that he could get a hint from the simpler case, already thoroughly discussed, provided the two factor lines were in one plane through the real unit line. This requires merely that y : z :: y' : z' ; oryz'—zy'=o; but then the product should be of the same form as the separate factors. Thus, in this special case, the term in ij ought to vanish. But the numerical factor appears to be yz'+zy', while it is the quantity yz'—zy' which really vanishes. Hence Hamilton was at first inclined to think that ij must be treated as nil. But he soon saw that " a less harsh supposition " would suit the simple case. For his speculations on sets had already familiarized him with the idea that multiplication might in certain cases not be commutative; so that, as the last term in the above product is made up of the two separate terms ijyz' and jizy', the term would vanish of itself when the factor-lines are coplanar provided ij = —ji, for it would then assume the form ij(yz' —zy'). He had now the following expression for the product of any two directed lines: xx' —yy' — zz' +i (yx' + xy' ) +j(xz' +zx' ) +ij(yz'—zy'). But his result had to be submitted to another test, the Law of the Norms. As soon as he found, by trial, that this law was satisfied, he took the final step. " This led me," he says, " to conceive that perhaps, instead of seeking to confine ourselves to triplets, . . . we ought to regard these as only imperfect forms of Quaternions, . . . and that thus my old conception of sets might receive a new and useful application." In a very short time he settled his fundamental assumptions. He had now three distinct space-units, i, j, k; and the following conditions regulated their combination by multiplication: z3=j'=k'=—1, ij = — ji = k, jk = — kj =i, ki=—ik=j.3 And now the product of two quaternions could be at once expressed as a third quaternion, thus (a+ib+jc+kd) (a'+ib'-{-jc'+kd') =A+iB+jC+kD, where A=aa'—bb'—cc'—dd', B =ab'+ba'+cd' —dc', C =ac'+ca'+db' —bd', D =ad'+da'+bc'—cb'. Hamilton at once found that the Law of the Norms holds,—not being aware that Euler had long before decomposed the product of two sums of four squares into this very set of four squares. And now a directed line in space came to be represented as ix+jy+kz, while the product of two lines is the quaternion — (xx' +yy' +zz') +i(yz' —zy') +j(zx' —xz') +k(xy' —yx'). To any one acquainted, even to a slight extent, with the elements of Cartesian geometry of three dimensions, a glance at the extremely suggestive constituents of this expression shows how justly Hamilton was entitled to say: " When the conception . . . had been so far unfolded and fixed in my mind, I felt that the new instrument for applying calculation to geometry, for which I had so long sought, was now, at least in part, attained." The date of this memorable discovery is October 16, 1843. Suppose, for simplicity, the factor-lines to be each of unit length. Then x, y, z, x', y', z' express their direction-cosines. Also, if 8 be the angle between them, and x", y", z" the direction-cosines of a line perpendicular to each of them, we have xx'+yy'+zz'=cos 0, yz'—zy"=x" sin 0, &c., so that the product of two unit lines is now expressed as —coso+(ix"+jy"+kz") sin B. Thus, when the factors 3 It will be easy to see that, instead of the last three of these, we may write the single one ijk = -1. are parallel, or B=o, the product, which is now the square of any , that of Grassmann. But it is to be observed that Grassmann, (unit) line is —i. And when the two factor lines are at right angles ~ though he virtually accused Cauchy of plagiarism, does not to one another, or 0=ir/2, the product is simply ix"+jy''+kz", the unit line perpendicular to both. Hence, and in this lies the main element of the symmetry and simplicity of the quaternion calculus, all systems of three mutually rectangular unit lines in space have the same properties as the fundamental system i, j, k. In other words, if the system (considered as rigid) be made to turn about till the first factor coincides with i and the second with j, the pro-duct will coincide with k. This fundamental system, therefore, becomes unnecessary; and the quaternion method, in every case, takes its reference lines solely from the problem to which it is applied. It has therefore, as it were, a unique internal character of its own. Hamilton, having gone thus far, proceeded to evolve these results from a characteristic train of a priori or metaphysical reasoning. Let it be supposed that the product of two directed lines is some-thing which has quantity; i.e. it may be halved, or doubled, for instance. Also let us assume (a) space to have the same properties in all directions, and make the convention (b) that to change the sign of any one factor changes the sign of a product. Then the product of two lines which have the same direction cannot be, even in part, a directed quantity. For, if the directed part have the same direction as the factors, (b) shows that it will be reversed by reversing either, and therefore will recover its original direction when both are reversed. But this would obviously be inconsistent with (a). If it be perpendicular to the factor lines, (a) shows that it must have simultaneously every such direction. Hence it must be a mere number. Again, the product of two lines at right angles to one another cannot, even in part, be a number. For the reversal of either factor must, by (b), change its sign. But, if we look at the two factors in their new position by the light of (a), we see that the sign must not change. But there is nothing to prevent its being represented by a directed line if, as further applications of (a) and (b) show we must do, we take it perpendicular to each of the factor lines. Hamilton seems never to have been quite satisfied with the apparent heterogeneity of a quaternion, depending as it does on a numerical and a directed part. He indulged in a great deal of speculation as to the existence of an extra-spatial ,unit, which was to furnish the raison d'etre of the numerical part, and render the quaternion homogeneous as well as linear. But for this we must refer to his own works. Hamilton was not the only worker at the theory of sets. The year after the first publication of the quaternion method, there appeared a work of great originality, by Grassmann,' in which results closely analogous to some of those of Hamilton were given. In particular, two species of multiplication (" inner " and " outer ") of directed lines in one plane were given. The results of these two kinds of multiplication correspond respectively to the numerical and the directed parts of Hamilton's quaternion product. But Grassmann distinctly states in his preface that he had not had leisure to extend his method to angles in space. Hamilton and Grassmann, while their earlier work had much in common, had very different objects in view. Hamilton had geometrical application as his main object; when he realized the quaternion system, he felt that his object was gained, and thenceforth confined himself to the development of his method. Grassmann's object seems to have been, all along, of a much more ambitious character, viz. to discover, if possible, a system or systems in which every conceivable mode of dealing with sets should be included. That he made very great advances towards the attainment of this object all will allow; that his method, even as completed in 1862, fully attains it is not so certain. But his claims, however great they may be, can in no way conflict with those of Hamilton, whose mode of multiplying couples (in which the " inner " and " outer " multiplication are essentially involved) was produced in 1833, and whose quaternion system was completed and published before Grassmann had elaborated for press even the rudimentary portions of his own system, in which the veritable difficulty of the whole subject, the application to angles in space, had not even been attacked. Grassmann made in 1854 • a somewhat savage onslaught on Cauchy and De St Venant, the former of whom had invented, while the latter had exemplified in application, the system of " clefs algebriques," which is almost precisely ' Die Ausdehnungslehre, Leipsic, 1844; 2nd ed., vollstandig and in strenger Form bearbeitet, Berlin. 1862. See also the collected works of Mobius, and those of Clifford, for a general explanation of Grassmann's method.appear to have preferred any such charge against Hamilton. He does not allude to Hamilton in the second edition of his work. But in 1877, in the Mathematische Annalen, xii., he gave a paper " On the Place of Quaternions in the Ausdehnungslehre," in which he condemns, as far as he can, the nomenclature and methods of Hamilton. There are many other systems, based on various principles, which have been given for application to geometry of directed lines, but those which deal with products of lines are all of such complexity as to be practically useless in application. Others, such as the Barycentrische Calciil of Mobius, and the Methode des equipollences of Bellavitis, give elegant modes of treating space problems, so long as we confine ourselves to projective geometry and matters of that order; but they are limited in their field, and therefore need not be discussed here. More general systems, having close analogies to quaternions, have been given since Hamilton's discovery was published. As instances we may take Goodwin's and O'Brien's papers in the Cambridge Philosophical Transactions for 1849. (See also ALGEBRA: special kinds.) Relations to other Branches of Science.—The above narrative shows how close is the connexion between quaternions and the ordinary Cartesian space-geometry. Were this all, the gain by their introduction would consist mainly in a clearer insight into the mechanism of co-ordinate systems, rectangular or not—a very important addition to theory, but little advance so far as practical application is concerned. But, as yet, we have not taken advantage of the perfect symmetry of the method. When that is done, the full value of Hamilton's grand step becomes evident, and the gain is quite as extensive from the practical as from the theoretical point of view. Hamilton, in fact, remarks,2 " I regard it as an inelegance and imperfection in this calculus, or rather in the state to which it has hitherto been unfolded, whenever it becomes, or seems to become, necessary to have recourse . . . to the resources of ordinary algebra, for the solution of equations in quaternions." This refers to the use of the x, y, z co-ordinates,--associated, of course, with i, j, k. But when, instead of the highly artificial expression ix-}-jy+kz, to denote a finite directed line, we employ a single letter, a (Hamilton uses the Greek alphabet for this purpose), and find that we are permitted to deal with it exactly as we should have dealt with the more complex expression, the immense gain is at least in part obvious. Any quaternion may now be expressed in numerous simple forms. Thus we may regard it as the sum of a number and a line, a-ba, or as the product, (3y, or the quotient, 3e-', of two directed lines, &c., while, in many cases, we may represent it, so far as it is required, by a single letter such as q, r, &c. Perhaps to the student there is no part of elementary mathematics so repulsive as is spherical trigonometry. Also, every-thing relating to change of systems of axes, as for instance in the kinematics of a rigid system, where we have constantly to consider one set of rotations with regard to axes fixed in space, and another set with regard to axes fixed in the system, is a matter of troublesome complexity by the usual methods. But every quaternion formula is a proposition in spherical (sometimes degrading to plane) trigonometry, and has the full advantage of the symmetry of the method. And one of Hamilton's earliest advances in the study of his system (an advance independently made, only a few months later, by Arthur Cayley) was the interpretation of the singular operator q( )q-', where q is a quaternion. Applied to any directed line, this operator at once turns it, conically, through a definite angle, about a definite axis. Thus rotation is now expressed in symbols at least as simply as it can be exhibited by means of a model. Had quaternions effected nothing more than this, they would still have inaugurated one of the most necessary, and apparently impracticable, of reforms. The physical properties of a heterogeneous body (provided they vary continuously from point to point) are known to depend, in the neighbourhood of any one point of the body, on a quadric function of the co-ordinates with reference to that point. The 2 Lectures on Quaternions, § 513. same is true of physical quantities such as potential, temperature, &c., throughout small regions in which their variations are continuous; and also, without restriction of dimensions, of moments of inertia, &c. Hence, in addition to its geometrical applications to surfaces of the second order, the theory of quadric functions of position is of fundamental importance in physics. Here the symmetry points at once to the selection of the three principal axes as the directions for i, j, k; and it would appear at first sight as if quaternions could not simplify, though they might improve in elegance, the solution of questions of this kind. But it is not so. Even in Hamilton's earlier work it was shown that all such questions were reducible to the solution of linear equations in quaternions; and he proved that this, in turn, depended on the determination of a certain operator, which could be represented for purposes of calculation by a single symbol. The method is essentially the same as that developed, under the name of " matrices," by Cayley in 1858; but it has the peculiar advantage of the simplicity which is the natural consequence of entire freedom from conventional reference lines. Sufficient has already been said to show the close connexion between quaternions and the theory of numbers. But one most important connexion with modern physics must be pointed out. In the theory of surfaces, in hydrokinetics, heat-conduction, potentials, &c., we constantly meet with what is called " Laplace's operator," viz. d2 22 ye + dz2. We know that this is an invariant; i.e. it is independent of the particular directions chosen for the rectangular co-ordinate axes. Here, then, is a case specially adapted to the isotropy of the quaternion system; and Hamilton easily saw that the expression idx +j --+k- dcould be, like ix+jy+kz, effectively expressed by a single letter. He chose for this purpose V. And we now see that the square of V is the negative of Laplace's operator; while V itself, when applied to any numerical quantity conceived as having a definite value at each point of space, gives the direction and the rate of most rapid change of that quantity. Thus, applied to a potential, it gives the direction and magnitude of the force; to a distribution of temperature in a conducting solid, it gives (when multiplied by the conductivity) the flux of heat, &c. No better testimony to the value of the quaternion method could be desired than the constant use made of its notation by mathematicians like Clifford (in his Kinematic) and by physicists like Clerk-Maxwell (in his Electricity and Magnetism). Neither of these men professed to employ the calculus itself, but they recognized fully the extraordinary clearness of insight which is gained even by merely translating the unwieldy Cartesian expressions met with in hydrokinetics and in electrodynamics into the pregnant language of quaternions. (P. G. T.) Supplementary Considerations.—There are three fairly well-marked stages of development in quaternions as a geometrical method. (I) Generation of the concept through imaginaries and development into a method applicable to Euclidean geometry. This was the work of Hamilton himself, and the above account (contributed to the 9th ed. of the Ency. Brit. by Professor P. G. Tait, who was Hamilton's pupil and after him the leading exponent of the subject) is a brief resume of this first, and by far the most important and most difficult, of the three stages. (2) Physical applications. Tait himself may be regarded as the chief contributor to this stage. (3) Geometrical applications, different in kind from, though more or less allied to, those in connexion with which the method was originated. These last include (a) C. J. Joly's projective geometrical applications starting from the interpretation of the quaternion as a point-symbol;' these applications may be said to require no addition to the quaternion algebra; (b) W. K. Clifford's biquaternions and G. Combebiac's tri-quaternions, which require the addition of quasi-scalars, independent of one another and of true scalars, and analogous to true scalars. As an algebraic 1 It appears from. Joly~'s and Macfarlane's references that J. B. Shaw, in America, independently of Joly, has interpreted the quaternion as a point-symbol.method quaternions have from the beginning received much attention from mathematicians. An attempt has recently been made under the name of multenions to systematize this algebra. We select for description stage (3) above, as the most characteristic development of quaternions in recent years. For (3) (a) we are constrained to refer the reader to Joly's own Manual of Quaternions (1905). The impulse of W. K. Clifford in his paper of 1873 (" Preliminary Sketch of Bi-Quaternions," Mathematical Papers, p. 181) seems to have come from Sir R. S. Ball's paper on the Theory of Screws, published in 1872. Clifford makes use of a quasi-scalar w, commutative with quaternions, and such that if p, q, &c., are quaternions, when p+wq= p'+wq', then necessarily p=p', q=q'. He considers two cases, viz. w2=1 suitable for non-Euclidean space, and w2=o suitable for Euclidean space; we confine ourselves to the second, and will call the indicated bi-quaternion p+wq an octonion. In octonions the analogue of Hamilton's vector is localized to the extent of being confined to an indefinitely long axis parallel to itself, and is called a rotor; if p is a rotor then wp is parallel and equal to p, and, like Hamilton's vector, wp is not localized; wp is therefore called a vector, though it differs from Hamilton's vector in that the product of any two such vectors wp and wo- is zero because w2=o . p+wo where p, o- are rotors (i.e. p is a rotor and coo- a vector), is called a motor, and has the geometrical significance of Ball's wrench upon, or twist about, a screw. Clifford considers an octonion p+wq as the quotient of two motors p+wo, p'+wa'. This is the basis of a method parallel throughout to the quaternion method; in the specification of rotors and motors it is independent of the origin which for these purposes the quaternion method, pure and simple, requires. Combebiac is not content with getting rid of the origin in these limited circumstances. The fundamental geometrical conceptions are the point, line and plane. Lines and complexes thereof are sufficiently treated as rotors and motors, but points and planes cannot be so treated. He glances at Grassmann's methods, but is repelled because he is seeking a unifying principle, and he finds that Grassmann offers him not one but many principles. He arrives at the tri-quaternion as the suitable fundamental concept. We believe that this tri-quaternion solution of the very interesting problem proposed by Combebiac is the best one. But the first thing that strikes one is that it seems unduly complicated. A point and a plane fix a line or axis; viz. that of the perpendicular from point to plane, and therefore a calculus of points and planes is ipso facto a calculus of lines also. To fix a weighted point and a weighted plane in Euclidean space we require 8 scalars, and not the 12 scalars of a tri-quaternion. We should expect some species of biquaternion to suffice. And this is the case. Let r,, co be two quasi-scalars such that n2=i, wn=w, rw=w2=o. Then the biquaternion 174+wr suffices. The plane is of vector magnitude zVq, its equation is zSpq=Sr, and its expression is the bi-quaternion 17Vq+wSr; the point is of scalar magnitude Sq, and its position vector is 0, where 1Vi3q=Vr (or what is the same, [Vr+q.Vr. q–']/Sq), and its expression is nSq+wVr. (Note that the 2 here occurring is only required to ensure harmony with tri-quaternions of which our present biquaternions, as also octonions, are particular cases.) The point whose position vector is Vrq–1 is on the axis and may be called the centre of the bi-quaternion; it is the centre of a sphere of radius Srg–1 with reference to which the point and plane are in the proper quaternion sense polar reciprocals, that is, the position vector of the point relative to the centre is Srq 1. Vq/Sq, and that of the foot of perpendicular from centre on plane is Srq'. Sq/Vq, the product being the (radius)2, that is (Srq^')2. The axis of the member xQ+x'Q' of the second-order complex Q, Q' (where Q=nq+wr, Q'=nq'+wr' and x, x' are scalars) is parallel to a fixed plane and intersects a fixed transversal, viz. the line parallel to q'q-1 which intersects the axes of Q and Q'; the plane of the member contains a fixed line; the centre is on a fixed ellipse which intersects the transversal; the axis is on a fixed ruled surface I Sidney, Spenser and Daniel, are really quatorzains. They to which the plane of the ellipse is a tangent plane, the ellipse being the section of the ruled surface by the plane; the ruled surface is a cylindroid deformed by a simple shear parallel to the transversal. In the third-order complex the centre locus becomes a finite closed quartic surface, with three (one always real) intersecting nodal axes, every plane section of which is a trinodal quartic. The chief defect of the geometrical properties of these bi-quaternions is that the ordinary algebraic scalar finds no place among them, and in consequence Q-1 is meaningless. Putting r —t7 = E we get Combebiac's tri-quaternion under the form Q=%p-l-rlq+wr. This has a reciprocal Q-1= p-1=nq 1 —wp-1rq 1, and a conjugate KQ (such that K[QQ'] _ KQ'KQ, K[KQ]=Q) given by KQ= EKq+i Kp+wKr; the product QQ' of Q and Q' is Epp'+'ggq'+w(pr'+rq'); the quasi-vector 2(1—K)Q is Combebiac's linear element and may be regarded as a point on a line; the quasi-scalar (in a different sense from the rest of this article) z(1+K)Q is Combebiac's scalar (Sp+Sq)+Combebiac's plane. Combebiac does not use K; and in place of E, 77 he uses µ=r7—E, so that µ2=1,wµ= —µw =w, w2=o. Combebiac's tri-quaternion may be regarded from many simplifying points of view. Thus, in place of his general tri-quaternion we might deal with products of an odd number of point-plane-scalars (of form µq+wr) which are themselves point-plane-scalars; and products of an even number which are octonions; the quotient of two point-plane-scalars would be an octonion, of two octonions an octonion, of an octonion by a point-plane-scalar or the inverse a point-plane-scalar. Again a unit point µ may be regarded as by multiplication changing (a) from octonion to point-plane-scalar, (b) from point-plane-scalar to octonion, (c) from plane-scalar to linear element, (d) from linear element to plane-scalar. If .Q=Upder74+cwr and we put Q=(r+zwt)(Ep+nq)X (r+wt) 1 we find that the quaternion t must be 2f(r)/f(q—p), where f(r)=rq—Kpr. The point p=Vt may be called the centre of Q and the length St may be called the radius. If Q and Q' are commutative, that is, if QQ' = Q'Q, then Q and Q' have the same centre and the same radius. Thus Q-1, Q, Q2, Q3, . . . have a common centre and common radius. Q and KQ have a common centre and equal and opposite radii; that is, the t of KQ is the negative conjugate of that of Q. When Sze=o, (r+zwu) ( ) (1+1wu)_1 is an operator which shifts (without further change) the tri-quaternion operand an amount given by u in direction and distance.
End of Article: QUATERNIONS
[back]
QUATERNARY
[next]
QUATORZAIN (from Fr. quatorze, fourteen)

Additional information and Comments

There are no comments yet for this article.
» Add information or comments to this article.
Please link directly to this article:
Highlight the code below, right click and select "copy." Paste it into a website, email, or other HTML document.