Other Free Encyclopedias » Online Encyclopedia » Encyclopedia - Featured Articles » Featured Articles: 0 Car Finance - What Does 0% Car Finance Mean to Black Tv Stands

Bath Tub Plumbing - An Overview of Bath Tub Plumbing

drain tubs home tub’s

Plumbing repair can be an extremely costly service to hire for one’s home. Many home owners choose to use professional plumbing services because they fear the potential complications and technical issues that they may encounter if they were to tackle the job themselves. However, many plumbing projects, such as bath tub plumbing, can be performed by even the most inexperienced home-handyman. Performing one’s own bath tub plumbing installation, maintenance, and repair can save a home owner hundreds or even thousands of dollars on overpriced professional services.

Bath tubs utilize one of the simplest plumbing layouts of any device in the home. There are two main types of bath tubs: freestanding tubs, such as a traditional claw foot tub, and built-in tubs, which are normally installed into an alcove where the tub is bordered by walls on three sides. These different types of tubs contain slightly different bath tub plumbing schemes. In freestanding tubs, the plumbing is a bit simpler. The bat tub’s main body gently slopes down to the tub’s drain, which leads to a double-legged piping system. One piping leg leads to the home’s primary drainage layout. The other leg branches out to an overflow drain opening, in case of emergencies where the water is beginning to flow excessively. A plumbing supply line feeds water to the bath tub’s faucet. In built-in tubs, the plumbing system is very similar, except for these tubs contain a third piping leg which connects the tub to a shower head. Both tubs’ drains are regulated using a specialized lever at the junction between the main pipe and the overflow drain.

Due to bath tubs’ very basic layouts, bath tub plumbing is very easy to install. After shutting off the house’s water supply, one must simply ensure that there is a secure piping connection between the supply lines for the faucet and risers (also for the shower head, where applicable). In homes where the bathroom’s main plumbing lines are set up to accommodate a bath tub, this is usually as simple as tightening the pipes’ connections and sealing them closed. Installation of a bath tub drain is a bit more involved but still quite uncomplicated. The P-trap, drain pipe, and overflow pipes must be fitted to the tub so that there are no gaps, leaks, or unlevel installations near the connection to the tub’s main body. This may involve a small amount of pipe cutting and trimming. However, once these steps have been accomplished, the drain’s components only need to be slid into place and attached securely. After the bath tub plumbing installation is complete, one must turn the house’s water supply back on and run the bath tub to check for drips and leaks. The installation should also be reviewed by a professional ensure that all safety regulations have been met.

Pre-existing bath tub plumbing is also fairly easy to maintain. For instance, most bath tub plumbing leaks are caused by loose pipe connections or cracks in the pipes’ junctions. Most of these problems can be readily solved using a wrench or replacement parts. In a few extreme cases, the plumbing may have to be torn out and re-installed, but these instances are rare and usually only occur in very old, dilapidated structures. Bath tub drains are also very easy to clean out and unclog. When the obstruction consists of small bits of dirt and grime along the drain pipes’ walls, chemicals such as Drano can be used to restore the drain to its optimal working condition (however, these chemicals should be used sparingly, as they are both damaging to the environment and can possibly corrode the metal pipes). For larger blockages, one simply has to fish the obstruction out of the drain’s pipes. Some blockages that are close to the drain’s surface can be removed using items that one would find around the house, such as needle nose pliers or a bent wire coat hanger. If the interference is located deeper in the drain pipes, a plumber’s snake may be necessary to remove the unwanted material from the drain’s interior. Sometimes, a plunger can be useful in sucking the material closer to the bath tub’s surface.

In most cases, there is no need to call a professional plumber to tend to one’s bath tub plumbing. The simple layout of bath tub plumbing causes its repair to be very straightforward and easy. Home owners can save a bundle of money by maintaining their bath tub plumbing on their own.

Baton Rouge Motel - Baton Rouge Motel Hotel Guide - Cambria Suites Baton Rouge, Holiday Inn Baton Rouge [next] [back] Bathroom Towel Racks - Organizing Your Bathroom With Towel Racks

User Comments

Your email address will be altered so spam harvesting bots can't read it easily.
Hide my email completely instead?

Cancel or